Lines Matching full:received

47 	#   <op>[,<mode>] rx-add-byte          add a spurious byte to the received CEC message
48 	#   <op>[,<mode>] rx-remove-byte       remove the last byte from the received CEC message
101 received or transmitted message, ``always`` to always trigger the error
105 So '``any rx-nack``' will NACK the next received CEC message,
106 '``any,always rx-nack``' will NACK all received CEC messages and
108 received and do that only for every other received message.
163     otherwise the opcode hasn't been received yet. This tests if the
170     Add a spurious 0x55 byte to the received CEC message, provided
175     Remove the last byte from the received CEC message, provided it
182     As soon as a start bit has been received the CEC adapter will switch
229     the full message received by the remote CEC adapter is
243     must be at least 18, otherwise the opcode hasn't been received yet.
258     must be at least 18, otherwise the opcode hasn't been received yet.
295     hasn't been received yet. This command can be used to test how the receiver
302     the opcode hasn't been received yet. This can be used to test how the
323     position must be at least 18, otherwise the opcode hasn't been received yet.