Lines Matching +full:din +full:- +full:ports
45 --------------------------------------
58 -----------------------------------------------
72 This goes against the current documentation for pilot-xfer and other
77 (this is usually /dev/ttyUSB1 if you do not have any other usb-serial
99 Kroah-Hartman at greg@kroah.com
103 -------------------
115 significant advantage of using USB is speed - I can get 73 to 113
120 contains the necessary packages and a simple step-by-step howto.
129 iPAQ - disable autosync by going to the Start/Settings/Connections menu
138 You can also try soft-resetting your PDA before attempting a connection.
155 --------------------------
157 Single port DB-9 serial adapter, pushed as a PDA adapter for iMacs (mostly
165 - basic input/output (tested with 'cu')
166 - blocking write when serial line can't keep up
167 - changing baud rates (up to 115200)
168 - getting/setting modem control pins (TIOCM{GET,SET,BIS,BIC})
169 - sending break (although duration looks suspect)
172 - device strings (as logged by kernel) have trailing binary garbage
173 - device ID isn't right, might collide with other Keyspan products
174 - changing baud rates ought to flush tx/rx to avoid mangled half characters
177 - parity, 7 vs 8 bits per char, 1 or 2 stop bits
178 - HW flow control
179 - not all of the standard USB descriptors are handled:
186 Keyspan USA-series Serial Adapters
187 ----------------------------------
189 Single, Dual and Quad port adapters - driver uses Keyspan supplied
194 The USA-18X, USA-28X, USA-19, USA-19W and USA-49W are supported and
195 have been pretty thoroughly tested at various baud rates with 8-N-1
199 The USA-28 isn't yet supported though doing so should be pretty
212 ------------------------------
214 This is a single port DB-25 serial adapter.
218 - TripNav TN-200 USB GPS
219 - Navis Engineering Bureau CH-4711 USB GPS
225 -------------------------------
232 --------------------------------------
245 - DeLorme's USB Earthmate GPS (SiRF Star II lp arch)
246 - Cypress HID->COM RS232 adapter
250 hid->com device.
275 The hid->com adapter can run at a maximum baud of 115200bps. Please note
289 (your problems/patches can alternately be submitted to usb-devel)
293 ----------------------
299 This driver works under SMP with the usb-uhci driver. It does not
315 --------------------------------
317 Single port DB-9/PS-2 serial adapter from Belkin with firmware by eTEK Labs.
325 - Baud rate 300-230400
326 - Data bits 5-8
327 - Stop bits 1-2
328 - Parity N,E,O,M,S
329 - Handshake None, Software (XON/XOFF), Hardware (CTSRTS,CTSDTR) [1]_
330 - Break Set and clear
331 - Line control Input/Output query and control [2]_
346 - Add true modem control line query capability. Currently tracks the
348 - Add error reporting back to application for UART error conditions.
349 - Add support for flush ioctls.
350 - Add everything else that is missing :)
356 Empeg empeg-car Mark I/II Driver
357 --------------------------------
360 client synchronization tools for an Empeg empeg-car mp3 player.
365 * emptool --usb /dev/ttyUSB0 (or whatever you named your device node)
372 ---------------------------------------
374 This driver is for the MCT USB-RS232 Converter (25 pin, Model No.
375 U232-P25) from Magic Control Technology Corp. (there is also a 9 pin
376 Model No. U232-P9). More information about this device can be found at
377 the manufacturer's web-site: http://www.mct.com.tw.
384 the same Vendor ID but different Product IDs. Sitecom's U232-P25 serial
386 driver. Also, D-Link's DU-H3SP USB BAY also works with this driver.
393 -----------------------------------
398 - Edgeport/4
399 - Rapidport/4
400 - Edgeport/4t
401 - Edgeport/2
402 - Edgeport/4i
403 - Edgeport/2i
404 - Edgeport/421
405 - Edgeport/21
406 - Edgeport/8
407 - Edgeport/8 Dual
408 - Edgeport/2D8
409 - Edgeport/4D8
410 - Edgeport/8i
411 - Edgeport/2 DIN
412 - Edgeport/4 DIN
413 - Edgeport/16 Dual
416 Kroah-Hartman at greg@kroah.com
419 REINER SCT cyberJack pinpad/e-com USB chipcard reader
420 -----------------------------------------------------
427 There is also a user part for a CT-API driver available. A site
429 maintainer (linux-usb@sii.li).
432 linux-usb@sii.li
436 ----------------------
441 from Aten (the UC-232) and IO-Data work with this driver, as does
442 the DCU-11 mobile-phone cable.
445 Kroah-Hartman at greg@kroah.com
448 KL5KUSB105 chipset / PalmConnect USB single-port adapter
449 --------------------------------------------------------
458 and pilot-manager -daemon calls will work. Baud rates up to 115200
463 See http://www.uuhaus.de/linux/palmconnect.html for up-to-date
467 ------------------------
469 This driver is for the Winchiphead CH341 USB-RS232 Converter. This chip
477 frank@kingswood-consulting.co.uk.
480 -------------------------------
484 ports, and the 7715 provides one serial and one standard PC parallel port.
486 will not appear unless parallel port support is first enabled at the top-level
491 - Implement ECP/EPP modes for the parallel port.
492 - Baud rates higher than 115200 are currently broken.
493 - Devices with a single serial port based on the Moschip MCS7703 may work
498 ---------------------
509 echo <vid> <pid> >/sys/bus/usb-serial/drivers/generic/new_id
523 Kroah-Hartman at greg@kroah.com
531 above, or join the Linux-USB mailing list (information on joining the
533 http://www.linux-usb.org/ )
536 Greg Kroah-Hartman