Lines Matching full:headphone

20   headphone and line-out jacks.  If built-in speakers and headphone
27   When both headphone and line-out jacks are present, it gives
29   speaker-only is chosen, plugging into a headphone or a line-out jack
31   selected, plugging to a headphone jack mutes both speakers and
50 Headphone as Line Out
51   When this control is ON, treat the headphone jacks as line-out
52   jacks.  That is, the headphone won't auto-mute the other line-outs,
71   When this enum control is enabled, the headphone output is routed
73   the primary stream.  In the case the headphone DAC is shared with a
74   side or a CLFE-channel DAC, the DAC is switched to the headphone
80   the front-channel.  Also, the same route is used for the headphone
97   the jack detection so that the headphone auto-mute can work, while 
119   When this enum control is enabled, the headphone output is routed