Lines Matching full:playback

8 Front/Rear Multi-channel Playback
18 (hw:0,1) is assigned to the second DAC for rear playback.
26 Please note that the CM8x38 DAC doesn't support continuous playback
50 playback should be routed there as default.  If not, there is a
56 The "Exchange DAC" switch is used to exchange front and rear playback
60 4/6 Multi-Channel Playback
63 The recent CM8738 chips support for the 4/6 multi-channel playback
72 formats, the 4/6-ch playback supports only the same condition for all
73 channels.  Since the multi-channel playback mode uses both DACs, you
82 For programming the 4/6 channel playback, you need to specify the PCM
83 channels as you like and set the format S16LE.  For example, for playback
116 The SPDIF playback and capture are done via the third PCM device
119 For playback with aplay, you can run like below:
132 The playback and capture over SPDIF use normal DAC and ADC,
133 respectively, so you cannot playback both analog and digital streams
153 	Mix analog PCM playback and FM-OPL/3 streams and
187 Note: When "PCM Playback Switch" is on, you'll hear the digital output
195 can be toggled via IEC958 playback control, but usually you need to
198 On the raw digital mode, the "PCM Playback Switch" is automatically
214 There are Master, PCM, Synth, CD, Line, Mic and PC Speaker playback
215 volumes.  Synth, CD, Line and Mic have playback and capture switches,
219 - PCM playback switch
223 - Aux playback volume/switch and capture switch