Lines Matching refs:commands
28 8. Control commands
31 8.3 Set maximum number of concurrent tagged commands
38 10. Boot setup commands
41 10.2.1 Default number of tagged commands
192 :Control commands: write operations to the proc SCSI file system
198 - Boot setup commands
258 me using tagged commands are the following:
272 maximum number of queued commands up to 32. The Symbios Setup only allows
275 The maximum number of simultaneous tagged commands queued to a device
280 This driver supports up to 255 commands per device, and but using more than
283 accept more than 64 simultaneous commands. So, using more than 64 queued
284 commands is probably just resource wasting.
292 will set tagged commands queue depths as follow:
305 to the actual number of disconnected commands.
307 - Every 200 successfully completed SCSI commands, if allowed by the
308 current limit, the maximum number of queueable commands is incremented.
312 number of commands used and their status, as well as its decision on the
341 8. Control commands
344 Control commands can be sent to the driver with write operations to
351 Using "all" for "<target>" parameter with the commands below will
354 Available commands:
381 8.3 Set maximum number of concurrent tagged commands
387 :tags: number of concurrent tagged commands
477 Entering 0 defaults to tagged commands not being used.
480 Maximum number of queued commands (default answer: 32)
481 This option allows you to specify the maximum number of tagged commands
489 10. Boot setup commands
495 Setup commands can be passed to the driver either at boot time or as
502 - enable tagged commands, up to 4 tagged commands queued.
514 10.2.1 Default number of tagged commands
519 #tags will be truncated to the max queued commands configuration parameter.
726 - tagged commands disabled
743 tagged commands queuing.