Lines Matching full:drives
33 QIC-drives). The result is that any tape can be read, writing can be
123 The tape driver currently supports up to 2^17 drives if 4 modes for
167 The st driver maintains statistics for tape drives inside the sysfs filesystem.
290 this read command. Should be disabled for those drives that don't like
435 for SCSI-1 drives and SCSI-2 seek for SCSI-2 drives. The file and
453 SCSI mode page 15. Note that some drives other methods for
454 control of compression. Some drives (like the Exabytes) use
455 density codes for compression control. Some drives use another
457 driver. Some drives without compression capability will accept
471 drives and several early drives this is the physically first
474 the physically first partition of many later drives, like the
475 LTO drives from LTO-5 upwards. The drive has to support partitions
519 the MTSEEK and MTIOCPOS for SCSI-2 drives instead of
579 is found from the extended sense data. Many drives set one or
599 Tandberg-compatible QFA for SCSI-1 drives and the SCSI-2
600 command for the SCSI-2 drives.
632 finished. The drives and SCSI adapters should handle this condition