Documentation/scsi/ncr53c8xx.rst

68    11. Some constants and flags of the ncr53c8xx.h header file
94 The initial Linux ncr53c8xx driver has been a port of the ncr driver from
106 - ncr53c8xx generic driver that supports all the SYM53C8XX family including
300 generic ncr53c8xx driver supports up to 64, but using more than 32 is
310   ncr53c8xx=tags:4/t2t3q15-t4q7/t1u0q32
339 	    boot your system using 'ncr53c8xx=verb:0' option.
365           /proc/scsi/ncr53c8xx/N     (N=0,1,2 ....)
369           /proc/scsi/ncr53c8xx/0
376          cat /proc/scsi/ncr53c8xx/0
480       echo "<verb> <parameters>" >/proc/scsi/ncr53c8xx/0
699 A boot setup command for the ncr53c8xx (sym53c8xx) driver begins with the
700 driver name "ncr53c8xx="(sym53c8xx). The kernel syntax parser then expects
705     lilo: linux root=/dev/hda2 ncr53c8xx=tags:4,sync:10,debug:0x200
716     insmod ncr53c8xx.o ncr53c8xx="tags:4 sync:10 debug:0x200"
730     insmod ncr53c8xx
733 address 0x1400 and then installs the ncr53c8xx driver to the adapter at IO
807       ncr53c8xx=tags:10/t2t3q16-t5q24/t1u2q32
1010     For example 'ncr53c8xx=excl:0xb400,excl:0xc000' indicate to the
1011     ncr53c8xx driver not to attach hosts at address 0xb400 and 0xc000.
1078    ncr53c8xx=mpar:y,spar:y,disc:y,specf:3,fsn:n,ultra:2,fsn:n,revprob:n,verb:1\
1084     ncr53c8xx=safe:y,mpar:y,disc:y
1085     ncr53c8xx=safe:y,disc:y
1086     ncr53c8xx=safe:y,mpar:y
1087     ncr53c8xx=safe:y
1091    ncr53c8xx=mpar:y,spar:y,disc:y,specf:1,fsn:n,ultra:2,fsn:n,revprob:n,verb:1\
1095 "ncr53c8xx=verb:2" to get the "static" setup of the driver, or add "verb:2"
1204 The ncr53c8xx always tries to attach all the controllers. Option 0x80 has
1205 not been added to the ncr53c8xx driver, since it has been reported to
1207 controller not to be attached by the ncr53c8xx driver at Linux boot, you
1268 11. Some constants and flags of the ncr53c8xx.h header file
1286 		ncr53c8xx=specf:n
1372 	README.ncr53c8xx	: this file
1373 	ChangeLog.ncr53c8xx	: change log
1374 	ncr53c8xx.h		: definitions
1375 	ncr53c8xx.c		: the driver code
1421   line: ncr53c8xx=revprob:y
1513     echo "setsync all 25" >/proc/scsi/ncr53c8xx/0
1519     echo "setflag 3" >/proc/scsi/ncr53c8xx/0
1526     echo "settags 3 8" >/proc/scsi/ncr53c8xx/0