Lines Matching refs:commands
26 8. Control commands
29 8.3 Set maximum number of concurrent tagged commands
38 10. Boot setup commands
46 10.2.6 Default number of tagged commands
63 10.3 Advised boot setup commands
72 14.1 Tagged commands with Iomega Jaz device
135 drivers, configuration parameters and control commands available through
212 :Control commands: write operations to the proc SCSI file system
218 - Boot setup commands
291 maximum number of queued commands up to 32. The Symbios Setup only allows
294 The maximum number of simultaneous tagged commands queued to a device
299 The sym53c8xx driver supports up to 255 commands per device, and the
303 more than 64 simultaneous commands. So, using more than 64 queued commands
312 will set tagged commands queue depths as follow:
325 to the actual number of disconnected commands.
327 - Every 1000 successfully completed SCSI commands, if allowed by the
328 current limit, the maximum number of queueable commands is incremented.
332 number of commands used and their status, as well as its decision on the
353 (See 10: Boot setup commands).
384 Synchronous transfer period 25, max commands per lun 4
413 The profiling information is updated upon completion of SCSI commands.
425 Number of completed commands
426 Example above: 18014 completed commands
449 Elapsed time for SCSI commands setups
473 8. Control commands
476 Control commands can be sent to the driver with write operations to
483 Using "all" for "<target>" parameter with the commands below will
486 Available commands:
512 8.3 Set maximum number of concurrent tagged commands
518 :tags: number of concurrent tagged commands
644 This option allows you to specify the maximum number of tagged commands
690 10. Boot setup commands
696 Setup commands can be passed to the driver either at boot time or as a
707 - enable tagged commands, up to 4 tagged commands queued.
727 The sequence of commands::
793 10.2.6 Default number of tagged commands
801 #tags will be truncated to the max queued commands configuration parameter.
811 - controller #0 target #2 and target #3 -> 16 commands,
812 - controller #0 target #5 -> 24 commands,
813 - controller #1 target #1 logical unit #2 -> 32 commands,
814 - all other logical units (all targets, all controllers) -> 10 commands.
1040 initiator win arbitration and it has other commands
1072 10.3 Advised boot setup commands
1116 and PCI write and invalidate commands. These features require the
1119 invalidate commands only if the corresponding bit is set to 1 in the
1295 Maximum number of simultaneous tagged commands to a device.
1306 Default number of simultaneous tagged commands to a device.
1311 Use SIMPLE TAG for read and write commands.
1348 Avoids timeouts for unordered tagged commands.
1351 Max number of commands that can be queued to a host.
1354 Max number of commands queued to a host for a device.
1394 14.1 Tagged commands with Iomega Jaz device
1399 while spinning up, it rejects Tagged commands. This behaviour is
1490 - tagged commands disabled
1507 tagged commands queuing.
1509 Try to enable one feature at a time with control commands. For example: