Lines Matching full:tagged
107 reported for each target device, as well as the status of Tagged Queuing.
140 The status of Wide Negotiation, Disconnect/Reconnect, and Tagged Queuing
146 BusLogic SCSI Host Adapters directly implement SCSI-2 Tagged Queuing, and so
147 support has been included in the driver to utilize tagged queuing with any
148 target devices that report having the tagged queuing capability. Tagged
154 tagged queuing for each target device as well as individual selection of the
155 tagged queue depth is available through driver options provided on the kernel
159 addition, tagged queuing is automatically disabled whenever the host adapter
160 firmware version is known not to implement it correctly, or whenever a tagged
161 queue depth of 1 is selected. Tagged queuing is also disabled for individual
181 Finally, if tagged queuing is active and more than one command reset occurs
183 minutes of operation, then tagged queuing will be disabled for that target
429 The BusLogic Driver Tagged Queuing Options allow for explicitly specifying
430 the Queue Depth and whether Tagged Queuing is permitted for each Target
431 Device (assuming that the Target Device supports Tagged Queuing). The Queue
434 that explicitly enabling Tagged Queuing may lead to problems; the option to
435 enable or disable Tagged Queuing is provided primarily to allow disabling
436 Tagged Queuing on Target Devices that do not implement it correctly. The
442 Target Devices that support Tagged Queuing, as well as the maximum Queue
443 Depth for devices that do not support Tagged Queuing. If no Queue Depth
447 do not support Tagged Queuing always have their Queue Depth set to
450 disables Tagged Queuing.
460 The "TaggedQueuing:Default" or "TQ:Default" option permits Tagged Queuing
466 The "TaggedQueuing:Enable" or "TQ:Enable" option enables Tagged Queuing for
472 The "TaggedQueuing:Disable" or "TQ:Disable" option disables Tagged Queuing
478 Tagged Queuing individually for each Target Device. <Target-Spec> is a
479 sequence of "Y", "N", and "X" characters. "Y" enables Tagged Queuing, "N"
480 disables Tagged Queuing, and "X" accepts the default based on the firmware