Lines Matching +full:protection +full:- +full:domain

26   - Regulator
27 - Electronic device that supplies power to other devices.
31 Input Voltage -> Regulator -> Output Voltage
34 - PMIC
35 - Power Management IC. An IC that contains numerous
39 - Consumer
40 - Electronic device that is supplied power by a regulator.
41 Consumers can be classified into two types:-
52 - Power Domain
53 - Electronic circuit that is supplied its input power by the
55 domain.
59 Regulator -+-> Switch-1 -+-> Switch-2 --> [Consumer A]
61 | +-> [Consumer B], [Consumer C]
63 +-> [Consumer D], [Consumer E]
67 - Domain 1: Switch-1, Consumers D & E.
68 - Domain 2: Switch-2, Consumers B & C.
69 - Domain 3: Consumer A.
73 Domain-1 --> Domain-2 --> Domain-3.
75 A power domain may have regulators that are supplied power
78 Regulator-1 -+-> Regulator-2 -+-> [Consumer A]
80 +-> [Consumer B]
84 - Domain 1: Regulator-2, Consumer B.
85 - Domain 2: Consumer A.
89 Domain-1 --> Domain-2
92 - Constraints
93 - Constraints are used to define power levels for performance
94 and hardware protection. Constraints exist at three levels:
100 - voltage output is in the range 800mV -> 3500mV.
101 - regulator current output limit is 20mA @ 5V but is
104 Power Domain Level: This is defined in software by kernel
106 power domain to a particular power range. i.e.
108 - Domain-1 voltage is 3300mV
109 - Domain-2 voltage is 1400mV -> 1600mV
110 - Domain-3 current limit is 0mA -> 20mA.
117 to through the levels as follows :-
124 Power Domain: is the new current limit within the domain
125 operating limits for this domain and system state (e.g.
139 relevant to non SoC devices and is split into the following four interfaces:-
178 See Documentation/ABI/testing/sysfs-class-regulator