Lines Matching full:checksum
112 Transport checksum handling
115 When an address is translated by ILA, an encapsulated transport checksum
118 including checksum offload in NICs, that process the checksum. There are
121 - no action Allow the checksum to be incorrect on the wire. Before
122 a receiver verifies a checksum the ILA to SIR address
125 - adjust transport checksum
127 and if a transport layer checksum is found then it is
128 adjusted to reflect the correct checksum per the
131 - checksum neutral mapping
134 the checksum. The low order sixteen bits of the identifier
139 Note that the checksum neutral adjustment affects the low order sixteen
179 If the C-bit is present, this is used as an indication that checksum
183 In the simplest format the identifier types, C-bit, and checksum
193 The checksum neutral adjustment may be configured to always be
195 checksum adjustment is in the low order 16 bits. The identifier is
201 | | Checksum-neutral adjustment |
204 The C-bit may used to explicitly indicate that checksum neutral
210 | | Checksum-neutral adjustment |
215 configuration. The checksum neutral adjustment may automatically
221 | | Checksum-neutral adjustment |
230 | | Checksum-neutral adjustment |
251 bits of the destination address. Checksum MODE is one of "no-action",
272 # Configure an ILA route that uses checksum neutral mapping as well
278 # Configure an ILA LWT route that uses auto checksum neutral mapping
292 # Configure an ILA to SIR mapping where checksum neutral is automatically