Lines Matching +full:01 +full:a
27 - The ice hardware uses hierarchical scheduling for Tx with a fixed
29 points. Root node represents a port, while all the leaves represent
39 One example would be sending traffic to queues that are not a multiple
41 the 9th queue has a different parent than the rest, and it's given
42 more bandwidth credits. This causes a problem when the system is
55 To address this need, you can switch to a 5-layer topology, which
59 is a lower configuration depth of the tree.
63 use a value of 5. For example:
66 Use a value of 9 to set it back to the default value.
130 kernel only displayed a 2-digit version number (major.minor).
140 incremented whenever a major breaking change occurs, or when the
144 a fix is delivered as a patch against an older base Option ROM.
159 variation of the DDP package has a unique name.
193 ``devlink-flash`` interface. It supports updating the device flash using a
223 The ``ice`` driver supports activating new firmware after a flash update
229 $ devlink dev reload pci/0000:01:00.0 reload action fw_activate
231 The new firmware is activated by issuing a device specific Embedded
242 a predefined set of available port split options for the whole device.
244 A system reboot is required for port split to be applied.
271 ``devlink port unsplit`` will select the option with a split count of 1. If
297 Both the ``nvm-flash`` and ``shadow-ram`` regions can be accessed without a
298 snapshot. The ``device-caps`` region requires a snapshot as the contents are
301 Users can request an immediate capture of a snapshot for all three regions
307 pci/0000:01:00.0/nvm-flash: size 10485760 snapshot [] max 1
308 pci/0000:01:00.0/device-caps: size 4096 snapshot [] max 10
310 $ devlink region new pci/0000:01:00.0/nvm-flash snapshot 1
311 $ devlink region dump pci/0000:01:00.0/nvm-flash snapshot 1
313 $ devlink region dump pci/0000:01:00.0/nvm-flash snapshot 1
319 $ devlink region read pci/0000:01:00.0/nvm-flash snapshot 1 address 0 length 16
322 $ devlink region delete pci/0000:01:00.0/nvm-flash snapshot 1
324 $ devlink region new pci/0000:01:00.0/device-caps snapshot 1
325 $ devlink region dump pci/0000:01:00.0/device-caps snapshot 1
326 0000000000000000 01 00 01 00 00 00 00 00 01 00 00 00 00 00 00 00
328 0000000000000020 02 00 02 01 32 03 00 00 0a 00 00 00 25 00 00 00
330 0000000000000040 04 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00
332 0000000000000060 05 00 01 00 03 00 00 00 00 00 00 00 00 00 00 00
334 0000000000000080 06 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00
336 00000000000000a0 08 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
338 00000000000000c0 12 00 01 00 01 00 00 00 01 00 01 00 00 00 00 00
340 00000000000000e0 13 00 01 00 00 01 00 00 00 00 00 00 00 00 00 00
342 0000000000000100 14 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00
344 0000000000000120 15 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00
346 0000000000000140 16 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00
348 0000000000000160 17 00 01 00 06 00 00 00 00 00 00 00 00 00 00 00
350 0000000000000180 18 00 01 00 01 00 00 00 01 00 00 00 08 00 00 00
352 00000000000001a0 22 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00
354 00000000000001c0 40 00 01 00 00 08 00 00 08 00 00 00 00 00 00 00
356 00000000000001e0 41 00 01 00 00 08 00 00 00 00 00 00 00 00 00 00
358 0000000000000200 42 00 01 00 00 08 00 00 00 00 00 00 00 00 00 00
361 $ devlink region delete pci/0000:01:00.0/device-caps snapshot 1
368 Functions in a tree structure and assign supported parameters: tx_share,
369 tx_max, tx_priority and tx_weight to each node in a tree. So effectively
377 devlink-rate API. To configure those features a driver reload is necessary.
399 an absolute number specifying a maximum amount of bytes a Node may
401 that a link will not oversaturate the receiver on the remote end
405 - minimum bandwidth allocated to a tree node when it is not blocked.
423 nodes with the same priority form a WFQ subgroup in the sibling group