device_drivers/fddi/skfp.rst

1 .. SPDX-License-Identifier: GPL-2.0
6 SysKonnect driver - SKFP
9 |copy| Copyright 1998-2000 SysKonnect,
11 skfp.txt created 11-May-2000
53   - SK-5521 (SK-NET FDDI-UP)
54   - SK-5522 (SK-NET FDDI-UP DAS)
55   - SK-5541 (SK-NET FDDI-FP)
56   - SK-5543 (SK-NET FDDI-LP)
57   - SK-5544 (SK-NET FDDI-LP DAS)
58   - SK-5821 (SK-NET FDDI-UP64)
59   - SK-5822 (SK-NET FDDI-UP64 DAS)
60   - SK-5841 (SK-NET FDDI-FP64)
61   - SK-5843 (SK-NET FDDI-LP64)
62   - SK-5844 (SK-NET FDDI-LP64 DAS)
66   - Netelligent 100 FDDI DAS Fibre SC
67   - Netelligent 100 FDDI SAS Fibre SC
68   - Netelligent 100 FDDI DAS UTP
69   - Netelligent 100 FDDI SAS UTP
70   - Netelligent 100 FDDI SAS Fibre MIC
83 Makes my life much easier :-)
94 	  Look in /proc/pci for the following entry:
96 	     'FDDI network controller: SysKonnect SK-FDDI-PCI ...'
101 	  If this entry does not exist or if the file '/proc/pci'
134 - System Manufacturer and Model
135 - Boards in your system
136 - Distribution
137 - Kernel version
162 v2.06 (20000511) (In-Kernel version)
165 	- 64 bit support
166 	- new pci dma interface
167 	- in kernel 2.3.99
169 v2.05 (20000217) (In-Kernel version)
172 	- Changes for 2.3.45 kernel
177 	- Added rx/tx byte counter
182 	- Fixed printk statements from v2.02
187 	- Removed unnecessary output
188 	- Fixed path for "printver.sh" in makefile
190 v2.01 (991122) (In-Kernel version)
193 	- Integration in Linux kernel sources
194 	- Support for memory mapped I/O.
199 	- Full source released under GPL
204 	- Compilation with kernel version 2.2.13 failed
209 	- New SMT module included, changing LED functionality
213 	- Synchronization on SMP machines was buggy
218 	- Interrupt routing on SMP machines could be incorrect
223 	- Support for kernel versions 2.2.x added
224 	- Kernel patch instead of private duplicate of kernel functions
243 	- tar archive instead of standard package format (rpm).
244 	- FDDI statistic is empty.
245 	- not tested with 2.1.xx kernels
246 	- integration in kernel not tested
247 	- not tested simultaneously with FDDI adapters from other vendors.
248 	- only X86 processors supported.
249 	- SBA (Synchronous Bandwidth Allocator) parameters can
251 	- does not work on some COMPAQ machines. See the PCI howto
253 	- data corruption with kernel versions below 2.0.33.