Lines Matching +full:10 +full:a

7 :Version: 1.14a
31     0e11	ae32		Compaq Netelligent 10/100 TX PCI UTP
32     0e11	ae34		Compaq Netelligent 10 T PCI UTP
34     0e11	ae40		Compaq Netelligent Dual 10/100 TX PCI UTP
35     0e11	ae43		Compaq Netelligent Integrated 10/100 TX UTP
36     0e11	b011		Compaq Netelligent 10/100 TX Embedded UTP
37     0e11	b012		Compaq Netelligent 10 T/2 PCI UTP/Coax
38     0e11	b030		Compaq Netelligent 10/100 TX UTP
53     However, if a card supports 100BaseTx without requiring an add
56     The "Netelligent 10 T/2 PCI UTP/Coax" (b012) device is untested,
64 	   debug messages, where x is a bit field where the bits mean
75 	   the adapter to use the AUI interface instead of the 10 Base T
77 	   connector on a TLAN based device.  (Setting this option on a
84 	4. You can set speed=10 to force 10Mbs operation, and speed=100
86 	   if a card which only supports 10Mbs is forced into 100Mbs
91 	   To force a 10Mbps Half-Duplex link do "insmod tlan.o speed=10
100 	   This sets aui to 0x1 and debug to 0x7, assuming eth0 is a
109 		0x08   use 10BaseT
118 	   use the above options on a per adapter basis. To force a 100Mbit/HD
124 	   Note that the tlan driver supports a maximum of 8 adapters.
136 There is also a tlan mailing list which you can join by sending "subscribe tlan"
139 There is also a tlan website at http://www.compaq.com