Lines Matching +full:100 +full:base +full:- +full:tx

1 .. SPDX-License-Identifier: GPL-2.0
9 (C) 1997-1998 Caldera, Inc.
13 (C) 1999-2001 Torben Mathiasen <tmm@image.dk, torben.mathiasen@compaq.com>
31     0e11	ae32		Compaq Netelligent 10/100 TX PCI UTP
34     0e11	ae40		Compaq Netelligent Dual 10/100 TX PCI UTP
35     0e11	ae43		Compaq Netelligent Integrated 10/100 TX UTP
36     0e11	b011		Compaq Netelligent 10/100 TX Embedded UTP
38     0e11	b030		Compaq Netelligent 10/100 TX UTP
41     108d	0012		Olicom OC-2325
42     108d	0013		Olicom OC-2183
43     108d	0014		Olicom OC-2326
49     I am not sure if 100BaseTX daughterboards (for those cards which
53     However, if a card supports 100BaseTx without requiring an add
54     on daughterboard, it should work with 100BaseTx.
75 	   the adapter to use the AUI interface instead of the 10 Base T
84 	4. You can set speed=10 to force 10Mbs operation, and speed=100
85 	   to force 100Mbs operation. (I'm not sure what will happen
86 	   if a card which only supports 10Mbs is forced into 100Mbs
90 	   do "insmod tlan.o speed=100" the driver will do Auto-Neg.
91 	   To force a 10Mbps Half-Duplex link do "insmod tlan.o speed=10
110 		0x10   use 100BaseTx
114 	   speeds with kernel-parameters.
115 	   ether=0,0,0x12,0,eth0 will force link to 100Mbps Half-Duplex.
118 	   use the above options on a per adapter basis. To force a 100Mbit/HD
121 		insmod tlan speed=0,100 duplex=0,1
123 	   Now eth0 will use auto-neg and eth1 will be forced to 100Mbit/HD.