Lines Matching refs:TX
78 - Programmable TX and RX Watchdog and Coalesce Settings
84 - Frame Preemption for TX and RX
87 - Multiple Scheduling Algorithms (TX: WRR, DWRR, WFQ, SP, CBS, EST, TBS;
173 This parameter changes the default LPI TX Expiration time in milliseconds.
308 To enter in TX LPI mode the driver needs to have a software timer that enable
380 9) Core is able to perform TX Checksum and/or RX Checksum in HW::
414 20) Limit the maximum TX and RX FIFO size::
419 21) Use the specified number of TX and RX Queues::
424 22) Use the specified TX and RX scheduling algorithm::
429 23) Internal TX and RX Queue parameters::
490 35) Enables TX LPI Clock Gating::
534 1) Programmable Burst Length (TX and RX)::
538 2) If set, DMA TX / RX will use this value rather than pbl::
628 For the TX Queues configuration, we have:
689 - ``descriptors_status``: To show the DMA TX/RX descriptor rings