Lines Matching refs:FW
735 be both queried and set locally. This mode requires the FW-based LLDP Agent to
741 private flag. Refer to the "FW-LLDP (Firmware Link Layer Discovery Protocol)"
753 FW-LLDP (Firmware Link Layer Discovery Protocol)
755 Use ethtool to change FW-LLDP settings. The FW-LLDP setting is per port and
911 Firmware (FW) logging
913 The driver supports FW logging via the debugfs interface on PF 0 only. The FW
914 running on the NIC must support FW logging; if the FW doesn't support FW logging
1004 Enabling FW log
1006 Configuring the modules indicates to the FW that the configured modules should
1008 events to the driver until the enable message is sent to the FW. To do this
1014 Retrieving FW log data
1016 The FW log data can be retrieved by reading from 'fwlog/data'. The user can
1018 when FW logging is disabled. The FW log data is a binary file that is sent to
1031 The driver receives FW log data from the Admin Receive Queue (ARQ). The
1032 frequency that the FW sends the ARQ events can be configured by writing to
1040 Configuring the amount of memory used to store FW log data
1042 The driver stores FW log data within the driver. The default size of the memory
1044 the user can change the amount of memory that is allocated for FW log data.
1046 one of: 128K, 256K, 512K, 1M, or 2M. FW logging must be disabled to change the