Lines Matching full:traffic

64 all traffic types, but lacking in small packet performance and latency.
69 it dynamically adjusts the InterruptThrottleRate value based on the traffic
70 that it receives. After determining the type of incoming traffic in the last
72 for that traffic.
74 The algorithm classifies the incoming traffic every interval into
76 adjusted to suit that traffic type the best. There are three classes defined:
77 "Bulk traffic", for large amounts of packets of normal size; "Low latency",
78 for small amounts of traffic and/or a significant percentage of small
80 minimal traffic.
84       However, this is generally not suitable for bulk throughput traffic due
93       4000 for traffic that falls in class "Bulk traffic". If traffic falls in
99       RX traffic.  If the bytes per second rate is approximately equal, the
101       traffic is mostly transmit or mostly receive, the interrupt rate could
122 properly tuned for specific network traffic. Increasing this value adds extra
124 traffic. If the system is reporting dropped receives, this value may be set
142 RxIntDelay, may improve traffic throughput in specific network conditions.
151 properly tuned for specific network traffic. If the system is reporting
164 may improve traffic throughput in specific network conditions.
227 you have a machine with a BMC enabled but cannot receive IPMI traffic after