ethernet/intel/e100.rst

1 .. SPDX-License-Identifier: GPL-2.0+
4 Linux Base Driver for the Intel(R) PRO/100 Family of Adapters
12 - In This Release
13 - Identifying Your Adapter
14 - Building and Installation
15 - Driver Configuration Parameters
16 - Additional Configurations
17 - Known Issues
18 - Support
24 This file describes the Linux Base Driver for the Intel(R) PRO/100 Family of
25 Adapters. This driver includes support for Itanium(R)2-based systems.
28 supplied with your Intel PRO/100 adapter.
31  - Native VLANs
32  - Channel Bonding (teaming)
33  - SNMP
57    for this parameter is 64-256. The default value is 256. This parameter can be
60      ethtool -G eth? rx n
64 Tx Descriptors:
69    range for this parameter is 64-256. The default value is 128. This parameter
72      ethtool -G eth? tx n
74    Where n is the number of desired Tx descriptors.
77    The driver auto-negotiates the link speed and duplex settings by
80      ethtool -s eth?  autoneg off speed {10|100} duplex {full|half}
90      ethtool -s eth? msglvl n
97 -------------------------------------------------
106 for the driver or module name, the name for the Linux Base Driver for
107 the Intel PRO/100 Family of Adapters is e100.
109 As an example, if you install the e100 driver for two PRO/100 adapters
117 ---------------------
124        dmesg -n 6
132 -------
142 --------------------------
150 ----
157 ------------------------------------------------------
161 (non-partitioned switch) behave as expected.  All Ethernet interfaces
185 to intel-wired-lan@lists.osuosl.org.