Lines Matching full:eth0

45     3. ifconfig eth0 up 10.xxx.xxx.xxx netmask 255.0.0.0
49 Now eth0 should active, you can test it by "ping" or get more information by
55 	alias eth0 dl2k
58 7. Run ``netconfig`` or ``netconf`` to create configuration script ifcfg-eth0
143   eth0, eth1, etc. To bring the NIC into an operational state,
146     ifconfig eth0 up
151     ifup eth0
159     ifdown eth0
160     ifconfig eth0 down
187      where ethx will be eth0 if the NIC is the only ethernet adapter, eth1 if
278     DEVICE=eth0