ethernet/3com/vortex.rst

33 	- 3c590 Vortex 10Mbps
34 	- 3c592 EISA 10Mbps Demon/Vortex
39 	- 3c900 Boomerang 10baseT
40 	- 3c900 Boomerang 10Mbps Combo
41 	- 3c900 Cyclone 10Mbps TPO
42 	- 3c900 Cyclone 10Mbps Combo
43 	- 3c900 Cyclone 10Mbps TPC
44 	- 3c900B-FL Cyclone 10base-FL
48 	- 3c905B Cyclone 10/100/BNC
58 	- 3c575 [Megahertz] 10/100 LAN  CardBus
108 	0	10baseT
109 	1	10Mbs AUI
111 	3	10base2 (BNC)
118 	10      Use default setting from EEPROM
255 10base2 and AUI interfaces.
257 Prior to January, 2001 this driver would autoselect the 10base2 or AUI
258 port if it didn't detect activity on the 10baseT port.  It would then
259 get stuck on the 10base2 port and a driver reload was necessary to
260 switch back to 10baseT.  This behaviour could not be prevented with a
268 it will permanently select the 10baseT port.  Automatic selection of
326   10baseT LAN plugged into a  switched 100baseT LAN, the throughput
347     100" and "duplex full" as well (or "speed 10" and "duplex half").
406        00: b7 10 00 92 07 00 10 02 74 00 00 02 08 20 00 00
407        10: 01 a4 00 00 00 00 00 db 00 00 00 00 00 00 00 00
408        20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 00 10
411    - A description of the environment: 10baseT? 100baseT?