Lines Matching full:transceiver

46 IRQ, and transceiver settings, although this capability shouldn't generally be
53 transceiver type 3 (10base2). The flag "0x3c509" must be set to avoid conflicts
76 (b) You must be using your card's 10baseT transceiver (i.e., the RJ-45
107 Available Transceiver Types
110 For versions of the driver v1.18c and above, the available transceiver types are:
113 0  transceiver type from EEPROM config (normally 10baseT); force half-duplex
118 8  transceiver type and duplex mode taken from card's EEPROM config settings
122 Prior to driver version 1.18c, only transceiver codes 0-4 were supported. Note
123 that the new transceiver codes 8 and 12 are the *only* ones that will enable
130 The transceiver type can be changed using 'ethtool'.
171 likely have an unterminated network or the incorrect media transceiver selected.