Lines Matching full:star
39 There are two "types" of ARCnet - STAR topology and BUS topology. This
41 available documentation, you can only connect STAR cards to STAR cards and
108 STAR network topologies. They are mostly the same. The only difference
110 while STAR use low impedance. Low impedance card (STAR) is electrically
113 Usually, the ARCnet networks are built up from STAR cards and hubs. There
157 R S - STAR type card
189 The official docs also state that you can use STAR cards at the ends of
196 anywhere in middle of a cable in a STAR topology network. And more - you
197 can use the bus card in place of any star card if you use a terminator. Then
245 a STAR card).
460 cable-connector and it's for changing to star or bus topology;
461 closed: star - open: bus
580 Since this board is designed both for point-to-point connection in star
583 the PC120, PC110 and PC100 star topology boards and the PC220, PC210 and
588 It can be used in a star or a daisy-chained network.
611 | |oo| IRQ4 | | STAR |_____|
627 STAR Selected - Star Topology (PC130E only)
733 Configuring the PC130E for Star or Bus Topology
736 The single jumper labeled STAR is used to configure the PC130E board for
737 star or bus topology.
738 When the jumper is installed, the board may be used in a star network, when
791 The board is designed both for point-to-point connection in star networks
796 It can be used in a star or a daisy-chained (BUS) network.
834 JP6 Selected - Star Topology (PC500 only)
960 Configuring the PC500 for Star or Bus Topology
964 star or bus topology.
965 When the jumper is installed, the board may be used in a star network, when
1203 - If using star topology with twisted pair wiring move the J3
1320 - P/N 120A ARCNET 8 bit XT/AT Star
1323 - P/N 120ST ARCNET 8 bit XT/AT Star, Twisted Pair
1324 - P/N 120SBT ARCNET 8 bit XT/AT Star, Bus, Twisted Pair
1539 - P/N 160A ARCNET 16 bit XT/AT Star
1856 BNC Coax connector (STAR ARCnet)
2467 | |STAR| BUS| T/P| |
2501 STAR| BUS | T/P Three fields for placing a sign (colored circle)