netlink/specs/dpll.yaml

3 name: dpll
5 doc: DPLL subsystem.
12       working modes a dpll can support, differentiates if and how dpll selects
18         doc: input can be only selected by sending a request to dpll
22         doc: highest prio input pin auto selected by dpll
28       provides information of dpll device lock status, valid values for
34           dpll was not yet locked to any valid input (or forced by setting
40           dpll is locked to a valid signal, but no holdover available
44           dpll is locked and holdover acquired
48           dpll is in holdover state - lost a valid lock or was forced
50           when dpll lock-state was already DPLL_LOCK_STATUS_LOCKED_HO_ACQ,
51           if dpll lock-state was not DPLL_LOCK_STATUS_LOCKED_HO_ACQ, the
52           dpll's lock-state shall remain DPLL_LOCK_STATUS_UNLOCKED)
59       information of dpll device lock status error.
65           dpll device lock status was changed without any error
70           dpll device lock status was changed due to undefined error.
76           dpll device lock status was changed because of associated
78           This may happen for example if dpll device was previously
85           This may happen for example if dpll device was previously
102     doc: type of dpll, valid values for DPLL_A_TYPE attribute
106         doc: dpll produces Pulse-Per-Second signal
110         doc: dpll drives the Ethernet Equipment Clock
207       measured signal phase difference between a pin and dpll device
216     name: dpll
405         Get id of dpll device that matches given attributes
406       attribute-set: dpll
410         pre: dpll-lock-doit
411         post: dpll-unlock-doit
424         Get list of DPLL devices (dump) or attributes of a single dpll device
425       attribute-set: dpll
429         pre: dpll-pre-doit
430         post: dpll-post-doit
451       doc: Set attributes for a DPLL device
452       attribute-set: dpll
456         pre: dpll-pre-doit
457         post: dpll-post-doit
484         pre: dpll-lock-doit
485         post: dpll-unlock-doit
505         - dump request with target dpll - list all the pins registered with
506           a given dpll device
507         - do request with target dpll and target pin - single pin attributes
512         pre: dpll-pin-pre-doit
513         post: dpll-pin-post-doit
550         pre: dpll-pin-pre-doit
551         post: dpll-pin-post-doit