Documentation/netlabel/draft-ietf-cipso-ipsecurity-01.txt

27 Please check the I-D abstract listing contained in each Internet Draft
46 mandatory access controls and multi-level security.  These systems are
88 once in a datagram.  All multi-octet fields in the option are defined to be
91 +----------+----------+------//------+-----------//---------+
93 +----------+----------+------//------+-----------//---------+
124 corresponding ASCII representations.  Non-related groups of systems may
148 actual security information to be passed.  All multi-octet fields in a tag
171 +----------+----------+--------//--------+
173 +----------+----------+--------//--------+
207 This is referred to as the "bit-mapped" tag type.  Tag type 1 is included
211 +----------+----------+----------+----------+--------//---------+
213 +----------+----------+----------+----------+--------//---------+
236 is to align the category bitmap field on an even octet boundary.  This will
297 +----------+----------+----------+----------+-------------//-------------+
299 +----------+----------+----------+----------+-------------//-------------+
322 is to align the category field on an even octet boundary.  This will
360 +----------+----------+----------+----------+------------//-------------+
362 +----------+----------+----------+----------+------------//-------------+
385 is to align the category range field on an even octet boundary.  This will
410 highest numbered category followed by the 2 octet index of the lowest
411 numbered category.  These range endpoints are inclusive within the range of
415 assumed to be 0.  The ranges MUST be non-overlapping and be listed in
423 the non-optimized form.  In addition, a CIPSO implementation MUST be able
424 to receive any valid tag type 1 even those using the optimized tag type 1
449 HOST_LABEL_MAX - This parameter contains the maximum sensitivity label that
467 HOST_LABEL_MIN - This parameter contains the minimum sensitivity label that
474 PORT_LABEL_MAX - This parameter contains the maximum sensitivity label for
481 PORT_LABEL_MIN - This parameter contains the minimum sensitivity label for
489 PORT_DOI - This parameter is used to assign a DOI identifier value to a
495 NET_DOI - This parameter is used to assign a DOI identifier value to a
501 HOST_DOI - This parameter is used to assign a DOI identifier value to a
557 lead to non-interoperability or even a security incident.  The
626 networks that have CIPSO and non-CIPSO hosts and the non-CIPSO hosts
732 cipso-request@wdl1.wdl.loral.com.