Lines Matching +full:light +full:- +full:sensor

1 .. SPDX-License-Identifier: GPL-2.0
17 -----------
19 APDS990x is a combined ambient light and proximity sensor. ALS and proximity
24 (infrared + visible light) and IR only. However, threshold comparisons happen
26 might vary quite much depending the spectrum of the light source.
39 values are known. Otherwise plain sensor default values are used.
48 -----
52 	RO - shows detected chip type and version
55 	RW - enable / disable chip. Uses counting logic
60 	RO - measured lux value
65 	RO - lux0_input max value.
67 	     Actually never reaches since sensor tends
69 	     on the light spectrum etc.
72 	RW - measurement rate in Hz
75 	RO - supported measurement rates
78 	RW - calibration value.
85 	RO - neutral calibration value
88 	RW - HI level threshold value.
95 	RW - LO level threshold value.
101 	RO - measured proximity value
106 	RO - prox0_raw max value (1023)
109 	RW - enable / disable proximity - uses counting logic
111 	     - 1 enables the proximity
112 	     - 0 disables the proximity
115 	RW - trigger / periodic.
125 	RO - accepted values to prox0_reporting_mode (trigger, periodic)
128 	RW - threshold level which trigs proximity events.