Lines Matching full:joystick

6 Parallel Port Joystick Drivers
20 happen include burning your parallel port, and/or the sticks and joystick
26 The joystick parport drivers are used for joysticks and gamepads not
59 for your pads, use either keyboard or joystick port, and make a pass-through
152 for joystick ports. They were all digital, and all used D-Cannon 9 pin
153 connectors (db9). Because of that, a single joystick could be used without
237 was written. It allows only one joystick / gamepad per parallel port, but
240 For the basic 1-button Multisystem joystick you connect its wires to the
252 However, if the joystick is switch based (eg. clicks when you move it),
271 the digital joystick driver 0.8.0.2, this is also supported by the db9.c
277 For some people just one joystick per parallel port is not enough, and/or
285 joystick can do more (eg. turbofire) you'll need to disable it totally first
303 And finally, you connect the Ground wire of the joystick, like done in
306 for each joystick. The power source is shared::
322 Steffen's version, there is support for up to 5 buttons per joystick.  However,
324 supports only one button per joystick. For more information on how to build the
359 Multisystem joystick. However, since they don't use switches and use TTL
506 	Type  Joystick/Pad
511 	  4   Multisystem 1-button joystick
512 	  5   Multisystem 2-button joystick
547 ``Type`` is the type of joystick or pad attached:
550 	Type  Joystick/Pad
553 	  1   Multisystem 1-button joystick
554 	  2   Multisystem 2-button joystick
559 	  8   Multisystem 1-button joystick (v0.8.0.2 pin-out)
578 interface ports 1-7 have. For a standard multisystem joystick, this is 1.