Lines Matching full:button
170 | +----> Button
190 | | +----> Button | | | +----> Button 1
191 | +------> Power | | +------> Button 2
208 | | +----> Button 1 | | | +----> Button
209 | +------> Button 2 | | +------> Power
215 +-----------> Up +-----------> Button 3
226 | | | +----> Right | | | +----> Button 1
229 +----------> Down +----------> Button 2
240 For the basic 1-button Multisystem joystick you connect its wires to the
250 (pin 6) -----> Button 1
254 resistors on each of the direction and button signals, like this::
263 For joysticks with two buttons you connect the second button to pin 7 on
266 (pin 7) -----> Button 2
289 and one pullup resistor. First, you connect the Directions and the button
297 (pin 6) -----|<|----> Button 1
299 For two button sticks you also connect the other button::
301 (pin 7) -----|<|----> Button 2
324 supports only one button per joystick. For more information on how to build the
358 All the Sega controllers are more or less based on the standard 2-button
365 The SMS gamepads are almost exactly the same as normal 2-button
380 | | +----> Button 1
382 +----------> Button 2
402 | | | +----> Button 1
405 +----------> Button 2
451 +-----------> Button 3
462 | | | +----> Button 1
465 +----------> Button 2
476 5 (Button 3) 14 (AUTOFD)
477 6 (Button 1) 17 (SELIN)
480 9 (Button 2) 7 (D5)
511 4 Multisystem 1-button joystick
512 5 Multisystem 2-button joystick
553 1 Multisystem 1-button joystick
554 2 Multisystem 2-button joystick
559 8 Multisystem 1-button joystick (v0.8.0.2 pin-out)
560 9 Two Multisystem 1-button joysticks (v0.8.0.2 pin-out)