Lines Matching full:fingers

53 per packet, and provides additional features such as position of two fingers,
55 for 2 fingers the concatenation of two 6 bytes packets) and allows tracking
56 of up to 3 fingers. Hardware version 4 uses 6 bytes per packet, and can
58 4 allows tracking up to 5 fingers.
280             n1..n0 = number of fingers on touchpad
302 This counting is reset whenever a different number of fingers is reported.
322             n1..n0 = number of fingers on touchpad
434          n1..n0 = number of fingers on touchpad
453 	 n4 = set if more than 3 fingers (only in 3 fingers mode)
486 two fingers, but only the pair of the lower-left and upper-right coordinates.
487 So the actual fingers might be situated on the other diagonal of the square
496          n1..n0 = number of fingers on touchpad
551 3 finger touch only reports the position of the center of all three fingers.
579         n1..n0 = number of fingers on touchpad
638 v4 hardware is a true multitouch touchpad, capable of tracking up to 5 fingers.
642 Whenever the numbers or identities of the fingers changes, the hardware sends a
643 status packet to indicate how many and which fingers is on touchpad, followed by
646 two fingers' position delta.
648 For example, when status packet tells there are 2 fingers on touchpad, then we