Lines Matching full:smbus

2 I2C/SMBUS Fault Codes
6 codes in the I2C/SMBus stack.
26 I2C and SMBus fault codes
56 	Returned by SMBus logic when an invalid Packet Error Code byte
59 	fault is only reported on read transactions; the SMBus slave
65 	Returned by SMBus adapters when the bus was busy for longer
67 	SMBus adapter) needs some fault recovery (such as resetting),
106 	doesn't support SMBus block transfers is asked to execute
119 	or SMBus (or chip-specific) protocol specifications.  One
120 	case is when the length of an SMBus block data response
121 	(from the SMBus slave) is outside the range 1-32 bytes.
131 	SMBus adapters may return it when an operation took more
132 	time than allowed by the SMBus specification; for example,
135 	arbitrary limits (much longer than SMBus!) too.