Lines Matching +full:parallel +full:- +full:in
2 Kernel driver i2c-parport
7 This is a unified driver for several i2c-over-parallel-port adapters,
11 * i2c-philips-par
12 * i2c-elv
13 * i2c-velleman
14 * video/i2c-parport
25 * (type=6) Barco LPT->DVI (K5800236) adapter
26 * (type=7) One For All JP1 parallel port adapter
27 * (type=8) VCT-jig
38 connected to the parallel port's interrupt pin.
42 -------------------------
44 If you want to build you own i2c-over-parallel-port adapter, here is
50 --- --- ---
54 --- --- ---
57 SCL ----------x--------o |-----------x------------------- pin 2
61 SDA ----------x----x---| o---x--------------------------- pin 13
65 ---------o |----------------x-------------- pin 3
68 --- ---
72 --- ---
78 - This is the exact pinout and electronics used on the Analog Devices
80 - All inverters::
83 -o |-
87 - All resitors are 10k.
88 - Pins 18-25 of the parallel port connected to GND.
89 - Pins 4-9 (D2-D7) could be used as VDD is the driver drives them high.
90 The ADM1032 evaluation board uses D4-D7. Beware that the amount of
91 current you can draw from the parallel port is limited. Also note that
94 the i2c-parport module might be a good safety since data line state
96 - This is 5V!
97 - Obviously you cannot read SCL (so it's not really standard-compliant).
105 --- --- --- ---
109 --- --- --- ---
112 SCL ----------x--------x--| o---x------------------------ pin 15
116 | ---o |-------------x-------------- pin 2
121 SDA ---------------x---x--| o--------x------------------- pin 10
125 ---o |------------------x--------- pin 3
128 --- ---
132 --- ---
143 -------------------------------
145 This driver is NOT the same as the i2c-pport driver found in the i2c
146 package. The i2c-pport driver makes use of modern parallel port features so
150 This driver is also NOT the same as the i2c-pcf-epp driver found in the
151 lm_sensors package. The i2c-pcf-epp driver doesn't use the parallel port as
157 -----------------------------------------
161 - Velleman http://www.velleman.be/
162 - Velleman K8000 Howto http://howto.htlw16.ac.at/k8000-howto.html
169 stepper motor card with the simple commands which are in the original
173 - http://home.wanadoo.nl/hihihi/libk8000.htm
174 - http://home.wanadoo.nl/hihihi/libk8005.htm
175 - http://struyve.mine.nu:8080/index.php?block=k8000
176 - http://sourceforge.net/projects/libk8005/
179 One For All JP1 parallel port adapter
180 -------------------------------------
184 jumper in the battery compartment. More details can be found at:
186 http://www.hifi-remote.com/jp1/
188 Details of the simple parallel port hardware can be found at:
190 http://www.hifi-remote.com/jp1/hardware.shtml