Documentation/hwmon/w83627hf.rst

7     Addresses scanned: ISA address retrieved from Super I/O registers
10     Addresses scanned: ISA address retrieved from Super I/O registers
13     Addresses scanned: ISA address retrieved from Super I/O registers
16     Addresses scanned: ISA address retrieved from Super I/O registers
19     Addresses scanned: ISA address retrieved from Super I/O registers
29 -----------------
39 -----------
42 the Winbond W83627HF, W83627THF, W83697HF and W83637HF Super I/O chips.
47 Super I/O chip and a second i2c-only Winbond chip (often a W83782D),
51 If you really want i2c accesses for these Super I/O chips,
55 The `w83627_HF_` uses pins 110-106 as VID0-VID4. The `w83627_THF_` uses the
66 [1] http://www.lm-sensors.org/browser/lm-sensors/trunk/doc/vid
69 -------------------
76 lm-sensors) before loading the driver:
78 # Enter the Super I/O config space::
80 	isaset -y -f 0x2e 0x87
81 	isaset -y -f 0x2e 0x87
85 	isaset -y 0x2e 0x2f 0x07 0x0b
87 # Set the base I/O address (to 0x290 in this example)::
89 	isaset -y 0x2e 0x2f 0x60 0x02
90 	isaset -y 0x2e 0x2f 0x61 0x90
92 # Exit the Super-I/O config space::
94 	isaset -y -f 0x2e 0xaa
96 The above sequence assumes a Super-I/O config space at 0x2e/0x2f, but
100 -------------------
107 - W83627THF