Documentation/hwmon/tps53679.rst

10     Addresses scanned: -
18     Addresses scanned: -
26     Addresses scanned: -
34     Addresses scanned: -
42     Addresses scanned: -
50     Addresses scanned: -
57 	Guenter Roeck <linux@roeck-us.net>
61 -----------
63 Chips in this series are multi-phase step-down converters with one or two
68 -----------
77 	# echo tps53681 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
81 ----------------
86 in1_input		Measured input voltage.
88 in1_lcrit		Critical minimum input voltage
90 			TPS53679, TPS53681, TPS53688 only.
92 in1_lcrit_alarm		Input voltage critical low alarm.
94 			TPS53679, TPS53681, TPS53688 only.
96 in1_crit		Critical maximum input voltage.
98 in1_crit_alarm		Input voltage critical high alarm.
100 in[N]_label		"vout[1-2]"
102 			- TPS53647, TPS53667: N=2
103 			- TPS53679, TPS53588: N=2,3
107 in[N]_lcrit		Critical minimum input voltage.
109 			TPS53679, TPS53681, TPS53688 only.
113 			TPS53679, TPS53681, TPS53688 only.
117 			TPS53647, TPS53667 only.
121 			TPS53679, TPS53681, TPS53688 only.
125 			TPS53679, TPS53681, TPS53688 only.
129 			- TPS53647, TPS53667: N=1
130 			- TPS53679, TPS53681, TPS53588: N=1,2
142 power1_input		Measured input power.
144 power[N]_label		"pout[1-2]".
146 			- TPS53647, TPS53667: N=2
147 			- TPS53676, TPS53679, TPS53681, TPS53588: N=2,3
153 curr1_input		Measured input current.
155 curr1_max		Maximum input current.
157 curr1_max_alarm		Input current high alarm.
159 curr1_crit		Critical input current.
161 curr1_crit_alarm	Input current critical alarm.
163 curr[N]_label		"iout[1-2]" or "iout1.[0-5]".
166 			digit is the phase within the channel. Per-phase
167 			telemetry supported on TPS53676 and TPS53681 only.
169 			- TPS53647, TPS53667: N=2
170 			- TPS53679, TPS53588: N=2,3
171 			- TPS53676: N=2-8
172 			- TPS53681: N=2-9
184 			Limit and alarm attributes are only available for
185 			non-phase telemetry (iout1, iout2).