Documentation/hwmon/stpddc60.rst

1 .. SPDX-License-Identifier: GPL-2.0
12     Addresses scanned: -
14     Datasheet: https://flexpowermodules.com/documents/fpm-techspec-bmr481
20 -----------
26 Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details
31 -----------
33 This driver does not auto-detect devices. You will have to instantiate the
34 devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
37 The vout under- and over-voltage limits are set in relation to the commanded
38 output voltage as a positive or negative offset in the interval 50mV to 400mV
40 when the commanded output voltage changes. Also, care should be taken when
41 writing to those limits since in the worst case the commanded output voltage
47 ---------------------
53 -------------
56 are read-write; all other attributes are read-only.
64 in1_crit_alarm		Input voltage critical high alarm.
67 in2_input		Measured output voltage.
68 in2_lcrit		Critical minimum output voltage.
69 in2_crit		Critical maximum output voltage.
70 in2_lcrit_alarm		Critical output voltage critical low alarm.
71 in2_crit_alarm		Critical output voltage critical high alarm.
74 curr1_input		Measured output current.
75 curr1_max		Maximum output current.
76 curr1_max_alarm		Output current high alarm.
77 curr1_crit		Critical maximum output current.
78 curr1_crit_alarm	Output current critical high alarm.
81 power1_input		Measured output power.
82 power1_crit		Critical maximum output power.
83 power1_crit_alarm	Output power critical high alarm.
87 temp1_max_alarm		High temperature alarm.