Lines Matching +full:vid +full:- +full:supply
10 Addresses scanned: I2C 0x2c - 0x2d
23 - Hartmut Rick <linux@rick.claranet.de>
25 - Special thanks to Jean Delvare for careful checking
30 -----------
33 of the SMSC LPC47M192 and compatible Super-I/O chips.
36 as well as CPU voltage VID input.
42 Voltages and temperatures are measured by an 8-bit ADC, the resolution
53 a +12V voltage measurement or a 5 bit CPU VID, but not both.
54 The default setting is to use the pin as 12V input, and use only 4 bit VID.
64 ---------------
73 This is the supply voltage of the sensor chip itself.
77 in[0-7]_min,
78 in[0-7]_max lower and upper alarm thresholds for in[0-7]_input reading
82 in[0-7]_alarm alarm flags for voltage inputs
85 temp1_input chip temperature measured by on-chip diode
86 temp[2-3]_input temperature measured by external diodes (one of these
89 temp[1-3]_min,
90 temp[1-3]_max lower and upper alarm thresholds for temperatures
92 temp[1-3]_offset temperature offset registers
97 Writing a non-zero number to one of them will reset the other
103 temp[1-3]_alarm alarm flags for temperature inputs, '1' in case of alarm,
105 temp[2-3]_input_fault diode fault flags for temperature inputs 2 and 3.
112 vrm CPU VID standard used for decoding CPU voltage
116 all others are read-only.