Documentation/hwmon/pc87360.rst

12     Datasheets: No longer available
22 -----------------
27     - 0: None
28     - **1**: Forcibly enable internal voltage and temperature channels,
30     - 2: Forcibly enable all voltage and temperature channels, except in9
31     - 3: Forcibly enable all voltage and temperature channels, including in9
33 Note that this parameter has no effect for the PC87360, PC87363 and PC87364
42 -----------
56   PC87360     -       2       2       -       0xE1
57   PC87363     -       2       2       -       0xE8
58   PC87364     -       3       3       -       0xE4
60   PC87366     11      3       3       3-4     0xE9
63 The driver assumes that no more than one chip is present, and one of the
67 --------------
73 Fan readings are affected by a programmable clock divider, giving the
75 but this driver implements dynamic clock divider selection, so you don't
76 have to care no more.
83     divider     speed (RPM)     RPM (RPM)       speed (RPM)
93  * slowest measurable speed: clock/(255*divider)
100 As mentioned above, you don't have to care about this no more.
103 divider is selected. This is not only true for the measured speeds, but
109 -----------
115 non-zero, can stop the fan, which may cause irreversible damage to your
120 speed readings. No explanation nor fix could be found.
124 ----------------------
138 voltages, and converted into temperatures in user-space.
150 ------------------
168 The driver will default to VRM 9.0, but this can be changed from user-space.
169 The chipsets can handle two sets of VID inputs (on dual-CPU systems), but
175 ---------------
182 a once-only alarm triggers, it may take 2 seconds for it to show, and 2
194 -----------