Lines Matching full:speed
106 There are 4 to 5 fan rotation speed sensors, 8 to 15 analog voltage sensors,
120 triggered if the rotation speed has dropped below a programmable limit. On
123 do not have a fan speed divider. The driver sets the most suitable fan divisor
124 itself; specifically, it increases the divider value each time a fan speed
125 reading returns an invalid value, and it reduces it if the fan speed reading
144 - this file stores PWM duty cycle or DC value (fan speed) in range:
146 0 (lowest speed) to 255 (full)
151 * 0 Fan control disabled (fans set to maximum speed)
154 * 3 "Fan Speed Cruise" mode
206 There are no changes to fan speed. Once the temperature leaves the interval, fan
207 speed increases (if temperature is higher that desired) or decreases (if
221 milliseconds before fan speed is increased
224 milliseconds before fan speed is decreased
231 Speed Cruise mode (3)
234 This modes tries to keep the fan speed constant.
237 Target fan speed
240 Target speed tolerance
248 This mode offers multiple slopes to control the fan speed. The slopes can be
254 critical temperature mode, in which the fans should run at full speed.
271 milliseconds before fan speed is increased
274 milliseconds before fan speed is decreased