Documentation/hwmon/max8688.rst

10     Addresses scanned: -
12     Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
14 Author: Guenter Roeck <linux@roeck-us.net>
18 -----------
20 This driver supports hardware monitoring for Maxim MAX8688 Digital Power-Supply
28 -----------
30 This driver does not auto-detect devices. You will have to instantiate the
31 devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
36 ---------------------
42 -------------
44 The following attributes are supported. Limits are read-write; all other
45 attributes are read-only.
56 in1_max_alarm		Voltage high alarm. From VOLTAGE_OV_WARNING status.
59 in1_crit_alarm		Voltage critical high alarm. From VOLTAGE_OV_FAULT
65 curr1_input		Measured current. From READ_IOUT register.
66 curr1_max		Maximum current. From IOUT_OC_WARN_LIMIT register.
67 curr1_crit		Critical maximum current. From IOUT_OC_FAULT_LIMIT
69 curr1_max_alarm		Current high alarm. From IOUT_OC_WARN_LIMIT register.
70 curr1_crit_alarm	Current critical high alarm. From IOUT_OC_FAULT status.
71 curr1_highest		Historical maximum current.
76 temp1_crit		Critical high temperature. From OT_FAULT_LIMIT register.
77 temp1_max_alarm		Chip temperature high alarm. Set by comparing
80 temp1_crit_alarm	Chip temperature critical high alarm. Set by comparing