Documentation/hwmon/ltc4282.rst

1 .. SPDX-License-Identifier: GPL-2.0-only
12     Addresses scanned: - I2C 0x40 - 0x5A (7-bit)
13     Addresses scanned: - I2C 0x80 - 0xB4 with a step of 2 (8-bit)
17         https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4282.pdf
25 from a live backplane. Using one or more external N-channel pass transistors,
31 parallel MOSFETs or support a 2-stage start-up that first charges the load
32 capacitance followed by enabling a low on-resistance path to the load. The
35 and power supplies must safely operate. Non-volatile configuration allows for
41 The following attributes are supported. Limits are read-write and all the other
42 attributes are read-only. Note that in0 and in1 are mutually exclusive. Enabling
51 in0_reset_history	Write 1 to reset in0 history.
64 in1_reset_history	Write 1 to reset in1 history.
123 ``/sys/kernel/debug/ltc4282-hwmon[X]/``
128 in0_fet_short_fault_log	 Set to 1 when the ADC detects a FET-short fault.
129 in0_fet_bad_fault_log    Set to 1 when a FET-BAD fault occurs.