Lines Matching +full:current +full:- +full:sense
10 Addresses scanned: -
16 Author: Guenter Roeck <linux@roeck-us.net>
20 -----------
22 The LTC4261/LTC4261-2 negative voltage Hot Swap controllers allow a board
27 -----------
37 $ echo ltc4261 0x10 > /sys/bus/i2c/devices/i2c-1/new_device
41 -------------
49 Current reading provided by this driver is reported as obtained from the ADC
50 Current Sense register. The reported value assumes that a 1 mOhm sense resistor
51 is installed. If a different sense resistor is installed, calculate the real
52 current by dividing the reported value by the sense resistor value in mOhm.
69 curr1_input SENSE current (mA)
70 curr1_alarm SENSE overcurrent alarm