Lines Matching +full:control +full:- +full:channel

1 Kernel drivers ltc2947-i2c and ltc2947-spi
10     Addresses scanned: -
14         https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2947.pdf
29 to control a fan as a function of measured temperature. Then, the GPIO becomes
31 temp2 channel is used to control this thresholds and to read the respective
37 The following attributes are supported. Limits are read-write, reset_history
38 is write-only and all the other attributes are read-only.
41 in0_input		VP-VM voltage (mV).
49 in0_label		Channel label (VP-VM)
59 in1_label		Channel label (DVCC)
61 curr1_input		IP-IM Sense current (mA)
69 curr1_label		Channel label (IP-IM)
79 power1_label		Channel label (Power)
89 temp1_label		Channel label (Ambient)
91 temp2_min		Low temperature threshold for fan control
92 temp2_max		High temperature threshold for fan control
93 temp2_min_alarm		Low temperature fan control alarm
94 temp2_max_alarm		High temperature fan control alarm
95 temp2_label		Channel label (TEMPFAN)