Lines Matching refs:voltage
22 The LTC2945 is a rail-to-rail system monitor that measures current, voltage,
44 registers. If a set of voltage divider resistors is installed, calculate the
45 real voltage by multiplying the reported value with (R1+R2)/R2, where R1 is the
46 value of the divider resistor against the measured voltage and R2 is the value
55 in1_input VIN voltage (mV). Voltage is measured either at
59 in1_lowest Lowest measured voltage
60 in1_highest Highest measured voltage
65 in2_input ADIN voltage (mV)
68 in2_lowest Lowest measured voltage
69 in2_highest Highest measured voltage
84 voltage or ADIN voltage depending on chip configuration.