Lines Matching +full:report +full:- +full:speed +full:- +full:hz

44 -----------
57 The Fintek F71806F/FG Super-I/O chip is essentially the same as the
65 ------------------
67 Voltages are sampled by an 8-bit ADC with a LSB of 8 mV. The supported
84 in1     VIN1    VTT1.2V      10K       -        1.00    1.20 V
89 in6     VIN6    VCC1.5V      10K       -        1.00    1.50 V
90 in7     VIN7    VCORE        10K       -        1.00   ~1.40 V [1]_
111 --------------
113 Fan rotation speeds are reported as 12-bit values from a gated clock
119 The chip assumes 2 pulse-per-revolution fans.
121 An alarm is triggered if the rotation speed drops below a programmable
126 ----------------------
141 -----------
143 Both PWM (pulse-width modulation) and DC fan speed control methods are
146 properly. The driver will report the method, but won't let you change
150 from 187.5 kHz (default) to 31 Hz. The best frequency depends on the
152 control, but may generate annoying high-pitch noise. So a frequency just
170   You define 3 temperature/fan speed trip points using the
172   relationship between temperature and fan speed with two additional points
176 * 3: Fan speed mode
177   You ask for a specific fan speed by writing to the fan<n>_target file.