Lines Matching full:cycle

167 cycle) of the input. The chip adjusts the sampling rate based on this value.
178 manual mode, the fan speed is set by writing the duty-cycle value to the
180 current duty-cycle as set by the fan controller in the chip. All PWM outputs
198 	pwm[1-3]_auto_point2_pwm	full-speed duty-cycle (255, i.e., 100%)
199 	pwm[1-3]_auto_point1_pwm	low-speed duty-cycle
200 	pwm[1-3]_auto_pwm_min		min-speed duty-cycle
208 The chip adjusts the output duty-cycle linearly in the range of auto_point1_pwm
211 auto_point1_temp_hyst value, the output duty-cycle is set to the auto_pwm_min
214 duty-cycle. If any of the temperatures rise above the auto_point3_temp value,
215 all PWM outputs are set to 100% duty-cycle.
217 Following is another representation of how the chip sets the output duty-cycle
221 	Temperature	Duty-Cycle	Duty-Cycle
228 			duty-cycle >
288 					to full-speed (100% duty-cycle).
299 fan[5-6]_max			RW	Max attainable RPM at 100% duty-cycle.
303 pmw[1-3,5-6]			RO/RW	Duty-cycle of PWM output. Supported
320 					fast the PWM duty-cycle will change
325 					cycle changes instantly).
336 					cycle. Supported values are 0 or
339 					low-speed duty-cycle.
341 					full-speed duty-cycle which is hard-
342 					wired to 255 (100% duty-cycle).