Lines Matching +full:min +full:- +full:rpm
1 .. SPDX-License-Identifier: GPL-2.0-or-later
3 Kernel driver aquacomputer-d5next
25 -----------
32 speed (in RPM), power, voltage and current. Temperature offsets and fan speeds
37 available through debugfs are the serial number, firmware version and power-on
39 temperature curves directly from the pump. If it's not connected, the fan-related
49 as well as eight PWM controllable fans, along with their speed (in RPM), power, voltage
53 sensor and four PWM controllable fans, along with their speed (in RPM), power,
63 The Leakshield exposes two temperature sensors and coolant pressure (current, min, max and
65 filled with coolant. Pump RPM and flow can be set to enhance on-device calculations,
69 and fan IC. It also exposes pump and fan speeds (in RPM), voltages, as well as pump
87 -----------
93 -------------
96 temp[1-20]_input Physical/virtual temperature sensors (in millidegrees Celsius)
97 temp[1-8]_offset Temperature sensor correction offset (in millidegrees Celsius)
98 fan[1-9]_input Pump/fan speed (in RPM) / Flow speed (in dL/h)
99 fan1_min Minimal fan speed (in RPM)
100 fan1_max Maximal fan speed (in RPM)
101 fan1_target Target fan speed (in RPM)
104 power[1-8]_input Pump/fan power (in micro Watts)
105 in[0-7]_input Pump/fan voltage (in milli Volts)
106 curr[1-8]_input Pump/fan current (in milli Amperes)
107 pwm[1-8] Fan PWM (0 - 255)
111 ---------------