Documentation/hwmon/aquacomputer_d5next.rst

1 .. SPDX-License-Identifier: GPL-2.0-or-later
3 Kernel driver aquacomputer-d5next
14 * Aquacomputer High Flow Next sensor
19 * Aquacomputer High Flow USB flow meter
25 -----------
32 speed (in RPM), power, voltage and current. Temperature offsets and fan speeds
35 For the D5 Next pump, available sensors are pump and fan speed, power, voltage
37 available through debugfs are the serial number, firmware version and power-on
39 temperature curves directly from the pump. If it's not connected, the fan-related
49 as well as eight PWM controllable fans, along with their speed (in RPM), power, voltage
53 sensor and four PWM controllable fans, along with their speed (in RPM), power,
59 The High Flow Next exposes +5V voltages, water quality, conductivity and flow readings.
65 filled with coolant. Pump RPM and flow can be set to enhance on-device calculations,
73 with speed, power, voltage and current of both the pump and optionally connected fan.
74 It also exposes pressure and flow speed readings.
78 The High Flow USB exposes an internal and external temperature sensor, and a flow meter.
80 The MPS Flow devices expose the same entries as the High Flow USB because they have
87 -----------
93 -------------
96 temp[1-20]_input Physical/virtual temperature sensors (in millidegrees Celsius)
97 temp[1-8]_offset Temperature sensor correction offset (in millidegrees Celsius)
98 fan[1-9]_input   Pump/fan speed (in RPM) / Flow speed (in dL/h)
99 fan1_min         Minimal fan speed (in RPM)
100 fan1_max         Maximal fan speed (in RPM)
101 fan1_target      Target fan speed (in RPM)
104 power[1-8]_input Pump/fan power (in micro Watts)
105 in[0-7]_input    Pump/fan voltage (in milli Volts)
106 curr[1-8]_input  Pump/fan current (in milli Amperes)
107 pwm[1-8]         Fan PWM (0 - 255)
111 ---------------