Lines Matching +full:all +full:- +full:inputs

39 	- Jordan Crouse
40 	- Hans de Goede
41 	- Darrick J. Wong (documentation)
42 	- Jean Delvare
46 -----------
51 measurement inputs and VID support. The ADT7490 also has additional
52 features, including extra voltage measurement inputs and PECI support. All
56 The ADT747x uses the 2-wire interface compatible with the SMBus 2.0
58 temperatures and two (2) or more voltages. It has four (4) 16-bit counters
69 Each of the measured inputs (voltage, temperature, fan speed) has
73 The ADT747x samples all inputs continuously. The driver will not read
78 ------------------------
81   * 2 voltage inputs
85   * 2 voltage inputs
88   * 5 voltage inputs
92   * 6 voltage inputs
99 -------------
104 in0  2.5VIN (22) 2.5VIN (22) -         -
114 ----------------
116 The ADT747x has a 10-bit ADC and can therefore measure temperatures
125 -----------------
129 - point1: Set the PWM speed at the lower temperature bound
130 - point2: Set the PWM speed at the higher temperature bound
143 At Tmin - hysteresis the PWM output can either be off (0% duty cycle) or at the
145 `pwm[1-*]_stall_disable sysfs attribute`. A value of 0 means the fans will shut
150 set the value in ms in the `temp[1-*]_smoothing` sysfs attribute.
153 -----
155 The nVidia binary driver presents an ADT7473 chip via an on-card i2c bus.