Lines Matching full:speed
57 high speed successive approximation ADC allows frequent sampling of all
76 with independent fan speed measurement cycles counting alternating rising
79 DS1780 measurement cycle is about once per second including fan speed.
81 LM81 measurement cycle is about once per 400ms including fan speed.
93 Fan Speed
96 clock via a divider to an 8-bit counter. Fan speed (rpm) is calculated by:
104 - low speed alarm is disabled
106 - auto fan clock adjuster enabled for valid fan speed reading
110 - low speed alarm is enabled
114 - low speed alarm will be asserted if fan speed is
115 less than minimum measurable speed
118 * User sets reasonable fan speed
120 - low speed alarm is enabled
124 * User sets unreasonably high low fan speed limit
126 - resolution of the low speed limit may be reduced
130 * fan speed may be displayed as zero until the auto fan clock divider
131 adjuster brings fan speed clock divider back into chip measurement
137 fan speed amplifier circuit. The analog output is set to maximum value on