Lines Matching +full:hot +full:- +full:swap
10 Addresses scanned: -
12 Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf
18 Addresses scanned: -
20 Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1272.pdf
26 Addresses scanned: -
28 Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1275.pdf
34 Addresses scanned: -
36 Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
42 Addresses scanned: -
44 Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1278.pdf
50 Addresses scanned: -
52 Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adm1281.pdf
58 Addresses scanned: -
60 Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf
62 Author: Guenter Roeck <linux@roeck-us.net>
66 -----------
69 ADM1275, ADM1276, ADM1278, ADM1281, ADM1293, and ADM1294 Hot-Swap Controller and
72 ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1281, ADM1293, and ADM1294 are hot-swap
75 integrated 12 bit analog-to-digital converter (ADC), accessed using a
83 -----------
85 This driver does not auto-detect devices. You will have to instantiate the
86 devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
93 The shunt value in micro-ohms can be set via device tree at compile-time. Please
98 ---------------------
105 -------------
107 The following attributes are supported. Limits are read-write, history reset
108 attributes are write-only, all other attributes are read-only.