Lines Matching +full:usb +full:- +full:otg +full:- +full:vbus

6 devices with an acpi-id of INT3496, such as found for example on
9 This ACPI device describes how the OS can read the id-pin of the devices'
10 USB-otg port, as well as how it optionally can enable Vbus output on the
11 otg port and how it can optionally control the muxing of the data pins
12 between an USB host and an USB peripheral controller.
18 Index 0  The input gpio for the id-pin, this is always present and valid
19 Index 1  The output gpio for enabling Vbus output from the device to the otg
20          port, write 1 to enable the Vbus output (this gpio descriptor may
22 Index 2  The output gpio for muxing of the data pins between the USB host and
23          the USB peripheral controller, write 1 to mux to the peripheral
31 	vbus	index 1